Honey Juice and Herb Plant Extraction Machine

Product introduction
This equipment is suitable for plant herbs, Chinese medicinal materials, food additives, etc. Extraction with water, ethanol, methanol, etc. and recovery and concentration of organic solvents. Features 1. The yield rate is increased by 10-15% compared with the multi-energy tank, and the effective ingredients contained in the medicinal tincture are more than twice as high. During the extraction process, the hot solvent is continuously added to the medicinal surface and passes through the medicinal material layer from top to bottom at high speed to dissolve the solute in the medicinal material. The solute-containing child in the medicinal material and the solute in the solvent maintain a high gradient. The solute dissolves at a high speed, the extraction rate of active ingredients is high, and the concentration is completed in a set of sealed equipment. The loss is small, the conversion rate is high, and the effective content of the ointment is high. 2. Due to the high-speed dissolution of the solute, the extraction time is short; the concentration and extraction are performed simultaneously, so it only takes 3 to 8 hours to the concentrated medicinal tincture, and the equipment utilization is high. 3. Single equipment, small footprint, high utilization, and low investment. 4. The solvent is only added once for extraction and recycled in a set of sealed equipment; the solvent in the medicine residue can basically be recovered, so the amount of solvent is reduced by more than 30% compared with the multi-energy tank, and the consumption rate can be reduced by 50 ~ 70%. 5. As the concentrated secondary steam is used as the heat source for extraction, pumping the concentrated_extract solution at the same temperature as the concentration can save more than 50% of the steam. The operation is simple and reduces the number of operators.

Essential oil extraction plant / herb essential distiller
1. Summary:
    The extracting and concentrating plant can be used in many processes such as atmospheric pressure, water decoction, wet soaking, thermal reflux, cyclic permeation, aromatic oil extraction and organic solvent recovery in medical and health care, pigment, food and beverage, animal and plant, chemical industry, etc. The plant has the advantages of elegant appearance, stable structure, high heat exchange efficiency, safety and reliability, low noise, corrosion resistance, long service life, environmental protection, energy saving, convenient maintenance and so on.The extraction and concentration plant adopts dynamic extraction and concentration, ultrasonic extraction and multi-function condensation recovery device, which has short time and high efficiency; the equipment adopts electric heating mode, high automation and CIP cleaning device in the tank, which can realize the control and display of extraction and concentration temperature; it meets the GMP medical standard and is mainly suitable for laboratory research in universities, research institutes and enterprises and institutions. Development and pilot production line. Specifications: 10L, 20L, 30L, 50L, 80L, 100L, 200L.



Characteristics of the equipment for extraction of Mugwort essential oil:
1. The small multi-functional extraction and enrichment unit has complete functions and can obtain the whole system vacuum, which can meet the extraction requirements of volatile oil, water extraction, alcohol extraction, animal viscera extraction, fractional extraction, heat (temperature) reflux extraction and other extraction requirements;
2. The extract can be concentrated and retractable, and the organic solvent can be recovered;
3. The equipment can be extracted by vacuum at low temperature, effectively reducing the loss of effective components of heat sensitivity. The extraction tank is equipped with two-stage stirring, which makes the large material in full contact with the solvent and speeds up the precipitation of active components.
4. The small multi-functional extraction and enrichment unit adopts a special structure in the enrichment system, so that the final specific gravity of the product can reach 1.4 and the discharge is smooth;
5. Concentrate: this equipment can be used outside heating combined natural cycle and vacuum negative pressure evaporation, evaporation speed, enrichment ratio can reach 1.3, the liquid in a state of full seal without the foam concentration, concentration of solution with this equipment, with no pollution, the characteristics of the ingredients in thick, and convenient cleaning (open heater cover can be cleaned up and down).
6. High degree of automatic control, easy to operate, accurate and reliable data acquisition;
7. During the operation of the hot reflux extraction and enrichment unit, the extraction equipment and the enrichment equipment can operate independently or jointly, which improves the rationality of the operation of the equipment and makes the operation convenient and convenient.
8. Alcohol recovery: with high recovery capacity, vacuum concentration process is adopted. Compared with the old similar equipment, it can increase productivity 5-10 times and reduce energy consumption by 30%. It has the characteristics of small investment and high recovery benefit.
9. The equipment is reasonably equipped, compact, compact and beautiful in appearance. The heater and evaporator adopt stainless steel insulation structure. Meet the requirements of laboratory conditions, easy to operate and maintain;
10. The equipment is equipped with an oil-water separator and an efficient condenser, which can extract essential oils of plants such as aromatic oils.
11. The contact part between the concentration system and the medicine of the extraction concentrator unit is made of 304 materials, and the heater is internal polished mirror tube, which meets the requirements of the relevant equipment provisions in the "Drug Production Quality Management Standard" of the State Medical Products Administration and relevant national standards.
12. The small multi-functional extraction and concentration unit can also be used in colleges and universities, scientific research institutions and hospitals as new drug extraction, new technology parameter determination, intermediate test, new variety development, precious medicinal materials extraction, volatile oil recovery and liquid concentration.
3. Technical Parameter